abrasion wear
英 [əˈbreɪʒn weə(r)]
美 [əˈbreɪʒn wer]
磨蚀；磨耗（量）；磨损
双语例句
- It is concluded that the mech anisms include gouging abrasion and fatigue wear.
认为其机制主要是：凿削式磨粒磨损和疲劳磨损。 - The failure of ceramic cutting tools in continuous cutting process is dominated by abrasion wear. The service life of the cutting tools is determined by the fracture toughness and hardness of the ceramics and the cutting parameters.
在连续切削的条件下，陶瓷刀具的失效形式是以磨粒磨损为主的磨损失效，其磨损寿命由材料的断裂韧性、硬度和切削过程的参数决定。 - Some application examples of ADI are described for different wear conditions such as requiring low friction coefficient, sliding and rolling requiring friction force to work, abrasion wear and special conditions.
文中列举了其在需要减小摩擦力的滑动摩擦条件下，需要摩擦力工作又要求耐磨条件下，磨料磨损以及某些特殊磨损条件下的应用实例。 - The effects of fiber twist and dipping treatment on the mechanical properties and resistance to abrasion and wear of ultrahigh molecular weight polyethylene ( UHMWPE) fiber were studied.
研究了纤维的捻度及浸胶处理对超高相对分子质量聚乙烯（UHMWPE）纤维力学性能及摩擦磨损性能的影响。 - The results show that there are higher grain grade and hardness, lower dilution and better performance of resistance to abrasion, wear and anti-erosion in the laser cladding layer.
激光熔覆层中的组织晶粒度和硬度高，稀释率低，抗摩擦磨损和抗腐蚀性能好； - The results show that the impact energy has great influence on the corrosive impact abrasion properties and wear mechanisms of the two steels.
结果表明，冲击功对两种钢的冲击腐蚀磨损性能和机制具有很大的影响。 - Aimed at the abrasion of pins, some experiments were carried out and the abrasion course was analyzed, the abrasion course of pins is the breaking-in, the abrasion wear and adhesive abrasion.
通过大量试验，分析了装载机销轴磨损的历程，表明销轴的磨损历程主要分为磨合阶段、磨粒磨损阶段和粘结磨损阶段。 - Effect of retained austenite on the abrasion wear resistance of High-Cr White Cast Iron
残余奥氏体对高铬白口铸铁磨料磨损特性的影响 - Metal friction and abrasion wear are resulted from mechanics, physical and chemical effect. It is a process in which mechanical, heat, chemical effects synthetically take effect.
金属的摩擦磨损是由力学的、物理的、化学的多个作用产生的结果，是机械效应、热效应、化学等效应综合作用的过程。 - Without the protection of pyrolytic carbon, C/ C composites by pitch impregnation only have the highest dimension wear rates due to the largely fracture of fibers and the wear mechanism are mainly abrasion wear and oxidation wear.
基体炭为单一沥青炭的C/C复合材料，由于没有热解炭对纤维的保护，纤维断裂多，线性磨损尤其大，磨损机理主要为大量的磨粒磨损与氧化磨损。